Extreme Performance: Features a 10-meter effective distance; stable enough to cut through 70cm wood blades with consistent output.
Intelligent Thermal Management: Engineered for long-term stability. Dual-fan system ensures the unit remains cool after 60 seconds of continuous use, with automatic thermal cutoff at 45°C for safety.
Precision Optics: Equipped with a 6x adjustable lens and an adjustable red dot coaxial aiming system to ensure your target is always in focus.
Power & Portability: Powered by a high-capacity ternary soft-pack battery (33V for 260W / 42V for 500W) with an intuitive two-speed switch.
Safety Warning: Class 4 laser product. Requires high safety awareness. Do not direct at reflective surfaces or eyes.
1、8 meters paper burning, the longest distance is 10 meters
2、The video shows that the wood is about 70 cm long and the blade is used to continuously punch holes and cut 5 times. The performance is very stable.
3、Red dot coaxial adjustable
4、The biggest feature of this product is its strong heat dissipation. According to the actual test, long pressing for one minute at normal temperature did not cause high temperature protection.
5、If the temperature exceeds 45 degrees Celsius, the pump output will be cut off. If it continues to work for one minute, the heat sink will only get a little warm.
6、Even if high temperature protection occurs, you only need to wait less than 10 seconds to recover. The fan is relatively quiet and does not whir like a violent fan.
Still the original formula: two-speed switch
7、High capacity ternary soft package battery
8、Adjustable 6x lens
9、Ready to use with charger
10、Please do not place an order without safety awareness
260W usage:
After receiving the product, make sure the lens is clean before installing the lens
Check whether the battery is sufficient. A full charge is above 33V. A full charge will have a better effect. When fully charged, the charger will automatically turn green. 28V means no power.
Close distance: The shallower the lens is installed, the closer the focus is. Only install it a little bit and use the black circle to clamp the lens. The focus is about one meter. You can refer to the size of the red dot spot. The smallest and thinnest position of the red dot is probably the focus (do not ignite the lens close to any object)
Long distance: Install the lens to the bottom, place the machine without shaking, aim at the distant carton, and press the launch switch for 3 seconds to see the effect. The specific spot size can be seen with the mobile phone camera, and can also be adjusted according to the spot seen by the mobile phone camera
500 watt usage:
Key point – make sure the lens is clean before installing the lens Avoid continuous long-term operation, which may cause high temperature of the driver, and avoid close exposure to highly reflective objects
Two black buttons at the back, the top is the main power switch, and the bottom is the red dot indicator switch.
After turning on the main power, press the handle switch to start emitting light (do not ignite the lens close to any object)
Check the power, a full charge is about 42V, and about 35V needs to be charged.
The green light will automatically turn on when it is full
Close distance: The shallower the lens is installed, the closer the focus is. The lens is only installed a little bit. Use a small black circle to clamp the lens. The focus is about one meter. You can refer to the size of the red dot light spot. The smallest and thinnest position of the red dot is probably the focus.
Long distance: Install the lens to the bottom, place the machine without shaking, aim at the distant carton and press the switch for 3 seconds to see the effect. 5. The specific light spot size can be seen by turning on the mobile phone camera, and the size can also be adjusted according to the light spot seen by the mobile phone.
Reviews
There are no reviews yet.